How To Diy Wood Table
A wooden table is not made up of anything but a set of base boards, four legs and a supporting structure below. Before starting with the creation of a wooden table is not made up of anything but a set of base boards, four legs and a supporting structure below. Before starting with the creation of your diy wood table, you need to prepare the materials. After that, starting the project by cut 2 pieces of 2 × 10 cm of the same length. And slightly less than the desired width for the table, then do the same as for the length.
Put the 4 pieces together to form a rectangle, with the same diagonal dimensions. These using the 4-5 centimeter flat head wood screws, to put the frame together, pre.forcing and flaring the seat of each screw. Next, cut the pieces of the real plane of 2 × 10 or 2 × 15 which are the best. Cutting them perfectly of its same size on each side. Tthen fix the table top of diy wood table to the frame, pre-drilling, flaring and filling each screw.
23 Photos Gallery of: How To Diy Wood Table
Put 4 battens on each corner on the inside of the frame. Whose crutches 30 cm long, will be hooked at the corners of 45 degrees, to work perfectly. Cut 4 legs from the 10 × 10 cm wood. Making sure that all the legs are cut to the same length and that all cuts are perfectly square. Then fix the legs to the table frame with wood screws, following the usual steps for each screw. Smooth the whole piece of furniture with an orbital sander. Last, paint the diy wood table and admire it.