Building Wood Night Table Lamps
Night table lamps – Whether you want to activate a lovely long wooden candlestick in a table lamp, or if you want to try drilling a piece of driftwood to make a one-of-a-kind lamp, you must learn to finish and assemble the final product. This project has two interesting wooden tiles formed into a table lamp. It takes about eight hours including drying time to make this lamp.
24 Photos Gallery of: Building Wood Night Table Lamps
One cut your own burl plates from fallen trees or buys them from a farmhouse specializing in rough chopped planks. Look for rounds night table lamps that are quarter sawed at 90 degrees so that more of the surface structure is exposed. There will be fewer warps in the smaller plate. Smooth the surface of tiles with a plan. Use the screws on the plane to regulate the depth of the wood curl. Always plan diagonally to control bites of edges against knots. Finish with a slight grind but be careful not to remove all the characters by scratching the surface completely clean. Wipe away dust with a pillow case.
Dilute wood oil by mixing some oil to a portion of solvent and wipe on a thin layer of oil on both sides of the plate. The oil is a sealant and gives the plate a night table lamps touch of gold making it ideal for either pine or maple. Wipe thoroughly before adding another layer of wood oil. Use up to five layers of oil. Determine if you want a softer matt finish of the oil or a high gloss. Choose a polymer surface if you want shine and apply two layers, wipe properly between the strokes. Use a half inch drill to drill through the side of the plate you will contain as the vertical interest in the lamp.